Used, Reconditioned Horizontal Boring Mills.

USED HORIZONTAL BORING MILLS

Used Horizontal Boring Mills used boring mills - horizontal

Following are examples of many available subject to prior sale.

2 Inch Horizontal Boring Mills

2” Tos Horizontal Boring Mill
Mod. Wh-63, Manual, 1980 Yr, 35 x 31 Rot. Table, 39” Cross Travl., 39” Long. Trav.
28” Vert. Travel, #34MT Taper, 1800 RPM, Tail Stock, DRO, Good Cond., $14,500.

3 Inch Horizontal Boring Mills

3” G&L Horizontal Boring Mill
Mod. 330T, Manual, 1948 Yr., 36 X 96 Tbl., 84” Cross Tr., 48” Vert. Tr., 1500 RPM,
Tail Stock, DRO, 15 HP, Spndl. Mtr., 220/440 Volt, III PH, Good Conditn., $17,500.

3” Wotan Horizontal Boring Mill
Model B-90, Manual,1965 Yr., 43 X 49 Rot. Table, 54” Cross Travel, 38” Saddle Tr.,
28” Spndl. Tr., 49” Vert. Tr., #5 MT Taper, 1600 RPM, DRO, Good Cond., $14,500.

3” Tos Horizontal Boring Mill
Mod. W-75, Manual, 1988 Yr., 36 x 36 Pwr. Rot.Tbl., 49” Cross Tr., 50” Saddle Tr.,
24” Spndl.Tr., 35” Vert. Tr., #40 Tpr., DRO, 1800 RPM, Facing Hd., Good, $19,500.

4 Inch Horizontal Boring Mills

4” G&L Horizontal Boring Mill
Mod. 340T, Manual, 1952 Yr., 48 X 74 Tbl., 64” Cross Tr., 72” Sadl. Tr., 36” Spndl.
Travel, 66” Vert.,Travel, #5MT Taper, 975 RPMs, In Very Nice Condition!, $39,500.

4” G&L Horizontal Boring Mill
Mod. 340T, Manual, 1954 Yr., 48 X 122 Tbl., 108” Cross Tr., 88” Sdl. Tr., 66”Vert.,
Trav., #5MT Tpr., 1300 RPM, 20 HP, 22/440 Volt, Outriggers, Really Nice, $89,500.

4” G&L Horizontal Boring Mill
Mod. 340T, Manual, 1954 Yr., 48 X 122 Tbl., 108” Cross Tr., 88” Sadl. Tr., 66”Vert.,
Trav., #5MT Tpr., 1300 RPM, 20 HP, 22/440 Volt, Outriggers, Really Nice, $89,500.

4” G&L Horizontal Boring Mill
Mod. 340-T, Manual, 1955 Year, 48 X 86 Table, 64” Cross Travel, 72” Long. Travel,
60”Vert. Trav., 27” Spindl. Travel, #50 Taper, 1300 RPMs, DRO, Real Nice, $34,500.

4” Lucas Horizontal Boring Mill
Mod. 42B-60, Manual, 1955 Yr., 40 X 74 Table, 60” Cross Trav., 72” Sadl. Travel or
48 with TS, 48” Vert. Tr., #5MT Spndl.Taper, 1200 RPMs, Tail Stock, Nice, $39,500.

4” G&L Horizontal Boring Mill
Mod. 65-D4-T, Manual, 1962 Yr., 36 X 72 Table, 60” Cross Travel, 48” Long. Trav.,
36” Vert. Tr., #50 Taper, 1300 RPMs, 24” Facing Hd., 20 HP, Good Cond., $49,500.

4” G&L Horizontal Boring Mill
Mod. 442B-72, Manual, 1964 Yr., 42 x 74 Table, 60” Cross Travel, 72” Saddle Trav,
48” Vert. Tr., #50 Taper, 1500 RPMs, All Hardened Ways, Good Condition, $39,500.

4” G&L Horizontal Boring Mill
Mod. T-4, Manual, 1965 Yr., 72 X 36 Rotary Table, 60” Cross Trav, 48” Long. Trav.,
44” Vert. Travl., #5MT Spndl. Taper, 1300 Spindle RPMs, Good Condition, $29,500.

4” G&L Horizontal Boring Mill
Mod. 65-E4-T, CNC, 1965 Year, Retro. 1998, 48 X 98 Table, 60” X Trav., 54” of Y
50” Vert. Trav., 24” W, #50 Tapr., 6000 RPM, Fanuc 16, Reman.’97, Nice, $119,500.

4” Wotan Horizontal Boring Mill
Mod. B-100-S, Manual, 1966 Year., 43 X 55 Table, 64” Cross Trav., 62” Long. Trav.
48” Vert.Tr., #50 Tpr., 1600 RPM, 43 X 55 Rotary Table, DRO, Very Nice, $39,500.

4” G&L Horizontal Boring Mill
Mod. 70-D4-T, Manual, 1966 Yr. 48 x 74 Table, 60” Cross Travel,48” Long. Travel,
60” Vert. Tr., 30” Spndl. Trav., #50 Taper, 1300 RPMs, DRO, Good Cond., $39,500.

4” G&L Horizontal Boring Mill
Mod. 70-E4-T, Manual, 1968 Yr., 48 X 86 Table, 87” Cross Travels, 80” Long.Travl.
50” Vert. Travl., 38” Spindle Tr., #50 Tpr., 1320 RPMs, Facing Hd., Good, $29,500.

4” G&L Horizontal Boring Mill
Mod. PMC-4, Manual, 1969 Year, 48 X 96 Table, 84” Cross Trav., 60” Long., Trav.,
48” Vert. Trav., #50 Tpr., 1320 RPM, 3 Axis DRO, Threadg., Good Cond., $49,500.

4” G&L Horizontal Boring Mill
Mod. DP4-T, Manual, 1970 Year, 48 X 96 Table, 75” Cross Travel, 59” Long. Trav.,
52” Vertical Trav., #50 Taper, 1300 Spindle RPMs, DRO, Good Condition, $39,500.

4” Tos Horizontal Boring Mill
Mod. W100, Manual , 1974 Yr., 49 X 49 Rot. Tbl, 63” Cross Travl., 49” Long.Travl.
44” Vert. Trav., 35” Spndl. Tr., #50 Taper, Facing Hd., DRO, Good Cond., $39,500.

4” Cinn. Gilbert Horizontal Boring Mill
Mod. CT, Manual, 1979 Year, 48 X 72 Table, 60” Cross Travels, 48” Longi. Travels,
48” Vert. Tr., 30” Spndl. Travl., #50 Taper, 1715 RPMs, Gov., Excellent, $69,500.

4” Tos Horizontal Boring Mill
Mod. W100A, Manual, 1980 Yr., 49 X 49, Rot. Table, 63” Cross Tr., 49” Long.Trav.,
44” Vert. Tr., #50NS Tapr., 1120 RPM, Facing Hd., 90 Degree Mill, DRO, $39,500.

4” Wotan Horizontal Boring Mill
Mod. B105S, Manual, 1980 Yr., 43 X 55, Rot. Table, 72” Cross Tr., 48” Long., Travl.
49” Vert. Tr., #50 Spndl. Tapr., 1,000 RPMs, DRO, Beautiful Boring Mill, $49,500.

4’ Wotan Horizontal Boring Mill
Mod. B105-5, Manual, 1981 Yr., 43 X 55 Rot. Table, 72” Cross Tr., 60” Long. Travl.,
49” Vert. Travl., 60” Spindle Tr., #50 Taper, 1000 RPMs, Good Condition, $34,500.

4” Union Horizontal Boring Mill
Mod. BFT-100, Manual, 1981 Yr., 51 X 58 Rot. Tbl., 86” Cross Tr., 36” Long.Trav.,
58” Vert. Trav., 42” Spindle Tr., #6 MT Taper, 600 RPM, Good Condition, $39,500.

4” Union Horizontal Boring Mill
Mod. BFT-105, CNC, 1989 Yr., 48 X 54 Rot. Tbl., 69” Cross Trav., 26” Long. Trav.,
49” Vert. Travl., 32” Spindle Trav., #50 Taper, 2500 RPMs, Good Cond., $129,500.

5 Inch Horizontal Boring Mills

5” G&L Horizontal Boring Mill
Mod. 350T, Manual, 1950 Year., 60 X 96 Table, 84” Cross Travels, 96” Long Travl.,
72” Vert. Trav., #5MT Tpr., 2000 RPM, Tail Stock, DRO, Good Condition, $27,500.

5” G&L Horizontal Boring Mill
Mod. 350T, Manual, 1951 Year, 84 X 48 Table, 72” Cross Travels, 84” Long. Travel,
66” Vert. Trav., 36” Spindle Travel, #5MT Spindle Taper, 975 RPM, Good, $29,500.

5” Lucas Horizontal Boring Mill
Mod. 542B-60, Manual, 1955 Yr., 48 x 72 Table, 72” Cross Travels, 72” Long. Trav.,
48” Vert. Trav., 34” Spindle Trav., # 50 NST Tpr., 1200 RPM, DRO, Good, $19,500.

5” G&L Horizontal Boring Mill
Mod. 350T, Manual, 1956 Year, 96 X 60 Table, 108” Cross Trav., 120” Long. Trav.,
72” Vert. Trav., #5MT Taper, 975 RPM, Tail Stock, Hard Ways, Very Nice, $49,500.

5” G&L Horizontal Boring Mill
Mod. 65-D5-T Manual, 1960 Year, 48 x 98 Table, 84” Cross Trav., 66” Long. Trav.,
72” Vert. Trav., 30” Spndl. Tr., #50 Spindle Taper, 975 RPMs, DRO, Nice, $39.500.

5” Lucas Horizontal Boring Mill
Mod. 542B-4, Manual, 1961 Yr., 48 X 86 Table, 84” Cross Travels, 41” Long. Travl.,
60” Vert. Trav., 36” Spndl. Tr., #50 Taper, 1200 RPM, DRO, Good Cond., $34,500.

5” G&L Horizontal Boring Mill
Mod. 70A-DP5-T, Manual, 1961 Year., 60 X 144 Tbl., 132” Cross Tr., 90” Long. Tr.,
60” Vert. Travl., 36” Spndl. Tr., #50 Taper, 975 RPMs, Rebuilt 1993, Nice, $139,500.

5” G&L Horizontal Boring Mill
Mod. 65-D5-T, Manual, 1963 Yr., 60 X 120 Tbl., 108” Cross Trav., 72” Long. Trav.,
72” Vert. Travel, #50 Tpr., 975 RPMs, DRO, Hard Ways, Very Nice Cond., $69,500.

5” Lucas Horizontal Boring Mill
Mod. 542B-120, Manual, 1967 Yr., 56 X 110 Table, 96” Cross Trav., 100” Long. Tr.,
72” Vert. Travl., 36” Spndl. Tr., #50 Taper, 1200 RPMs, Very Good Cond., $99,500.

5” G&L Horizontal Boring Mill
Mod. 70A-DP5-T, Manual, 1967 Yr., 48 X 98 Tbl., 82” Cross Trav., 64” Long. Trav.,
48” Vert. Travl., #50 Tpr., 975 RPMs, Saddle Out-riggers, Good Condition, $69,500.

5” Lucas Horizontal Boring Mill
Mod. 542B-120, Manual, 1969 Year., 48 X 122 Table, 120” Cross Tr., 70” Long. Tr.,
96” Vert. Tr., 36” Spindle Travl., #50 Taper, 1200 RPMs, DRO, Excellent, $129,500.

5” Lucas Horizontal Boring Mill
Mod. 42B-4218, Manual, 1970, 48 X 122 4-Way Bed, 120” Cross Tr., 70” Long. Tr.,
96” Vert. Tr., 36” Spndl. Tr., #50 Tapr., 1220 RPMs, Threads, DRO, Nice, $139,500.

5” G&L Horizontal Boring Mill
Mod. PMC-5, Manual, 1970 Year, 60 X 96 Table, 84” Cross Travel, 72” Long. Trav.,
84” Vert. Trav., 36” Spndl. Trav., #50 NST Taper, 1120 RPM, Good Cond., $79,900.

5” Lucas Horizontal Boring Mill
Mod. 542B-120, Manual, 1970 Year, 48 X 122 Table, 108” Cross Tr., 72” Long. Tr.,
84” Vert. Travl., #50 Taper, 1200 RPMs, DRO, Add-On Rotary, Very Nice, $84,500

5” Lucas Horizontal Boring Mill
Mod. 542B-120, Manual, 1971 Year, 48 X 122 Table, 108” Cross Tr., 72” Long. Tr.,
84”Vert. Travel, #50 Spindle Taper, 1200 RPMs, DRO, In Good Condition, $79,500.

5” Lucas Horizontal Boring Mill
Mod. 30B-65, Manual, 1974 Yr., 60 X 86 Rot. Table, 84” Cross Trav, 48” Long. Tr.,
60” Vert. Trav., 36” Spndl. Trav., #50 Taper, 1200 RPMs, Good Condition, $69,500.

5” Wotan, Horizontal Boring Mill
Mod. B130-S, Manual, 1975 Year., 60 X 67 Rot. Table, 100” Cross Tr, 72” Long.Tr.,
84” Vert. Travl., 60” Spnd. Trav., #50 Taper, 1250 RPMs, Good Condition, $74,500.

5” Lucas Horizontal Boring Mill
Mod. 30B-65, Manual, 1975 Year, 60 X 86 Table, 84” Cross Trav., 48” Long. Trav.,
60” Vert. Trav., 36” Spndl. Trav., #50 Taper, 1200 RPMs, Good Condition, $69,500.

5” G&L Horizontal Boring Mill
Mod. A130-5, Manual, 1977 Yr., 60 X 120 Tbl., 108” Cross Trav., 78” Long. Trav.,
94” Vert. Trav., 36” Spndl. Trav., #50 Tpr., 1200 RPM, Very Nice Cond., $79,500.

5” G&L Horizontal Boring Mill
Mod. H5-T, Manual, 1978 Yr., 72 X 122 Table, 108” Cross Trav., 72” Long. Travl.,
96” Vert. Trav., 36” Spindle Trav., #50 NST Tpr., 1200 RPMs, Excellent, $139,500.

5” G&L Fraz. Horizontal Boring Mill
Mod. 80DP-5T, Manual, 1979 Yr., 60 X 120 Table, 108” Cross Trav., 72” Long. Tr.,
84” Vert. Travel, 36” Spndl. Trav., 50 NST Taper, 975 RPM, Good Cond., $79,500.

5” Lucus Horizontal Boring Mill
Mod. 30DC, Manual, 1980 Yr. 60 x 122 Tbl., 96” Cross Tr., 72” Long., 122” Vert.,
36’ Spindle Travel, #50 Taper, 1200 RPM, DROs, Tap/Thread/Drill, Nice, $59,500.

5” Tos Horizontal Boring Mill
Mod. WHN-138A, Manual, 1981, 63 X 70 Rot. Tabl., 138” Cross Tr., 49” Long. Tr.,
79” Vert. Tr., 31” Spndl. Trav., #50 Tpr., Facing Hd , 90 Deg. Hd, Excel., $125,000.

6 Inch Horizontal Boring Mills

6” G&L Horizontal Boring Mill
Mod. 65-H6-T, Manual, 1965 Yr., 60 X 144 Tbl., 132” Cross Trav., 57” Long. Trav.,
84” Vert. Trav., 36” Spndl. Tr., #50 Taper, 1020 RPMs, Very Nice Cond., $149,500

6” G&L Horizontal Boring Mill
Mod. 75-H6-T, Manual, 1974 Yr., 60 X 120 Table, 108” Cross Trav., 65” Long. Tr.,
96” Vert. Trav., 36” Spndl. Tr., #50 Taper, 1020 RPMs, Good Condition, $135,000

6” G&L Horizontal Boring Mill
Mod. 70-H6-T, Manual, 1978 , 72 X 168 Table, 156” Cross Trav., 144” Long. Trav.,
120” Vert. Trav., 48” Spndl. Tr., #50 Travel, 1020 RPM, DRO, Excellent, $179,500

6” G&L Horizontal Boring Mill
Mod. H6-T Manual, 1979 Yr., 72 X 168 Table, 156” Cross Travel, 66” Long. Travl.
84” Vert. Tr., 36” Spndl. Tr., #50 Taper, 1200 RPMs, DRO, Good Cond., $149,500

6” Toshiba Horizontal Boring Mill
Mod. BP-150-R22, CNC 5 Axis, 2000, 86 X 70 Rot. T., 140” Crs. Tr., 60” Lng. Tr.,
90” Vert. Tr., 28” Spndl. Tr., #50 Tpr., 2500 RPMs, Helical Interp., Nice, $545,500

6” G&L Horizontal Boring Mill
Mod. PMC-50, CNC 4 Axis Retro ’07, 73 X 48 Rot., 60” Cross Tr. , 54” Long. Tr.,
78” Vert. Trav., 36” Spindle Tr., #50 Taper, 1120 RPM, Excellent Cond., $189,500

Horizontal Boring Mills: Since the 1800’s, horizontal boring mills have been in use. At first they were very primitive and basically used in the boring of large gun barrels. Today horizontal boring mills have evolved to be used in not only boring operations but also drilling, milling, tapping, turning and threading. Predominantly, horizontal boring mills are used to machine large precision parts. Machines equipped with a tail stock are capable of performing very long boring operations without losing accuracy. In order to help you purchase the right horizontal boring mill for your needs, we need to know how large and how heavy the parts will be that are to be machined. This will determine the size table and travels needed. We’ll need to know the maximum height of parts so we can determine how much vertical travel the spindle will need to have. If you will be machining a lot of aluminum, you may need to buy a horizontal boring mill with more RPM’s. Heavy cuts in stainless steel may require low RPM’s and high torque. Parts that require machining on two or more sides can be machined with a lot less difficulty if the horizontal boring mill is equipped with a rotary table. G&L is by far the most popular brand of horizontal boring mill but we also deal in Lucus, Union, Wotan and others. Each brand has its own inherent advantages such as low height etc. Spindle diameter needed is determined by the size bores you will be making and also, the amount of torque and rigidity required to do the job. We look forward to helping!

Call 800-834-1952 now or email TomHaleEquipment@gmail.com

Used, Reconditioned Horizontal Boring Mills.